Ga door naar hoofdinhoud
Engels
Nederlands

Stap 7 vertalen

Stap 7
Carefully turn the daughterboard over, making sure to not tear the attached cable. Pull the IR Sensor cable straight away from its socket on the board.
  • Carefully turn the daughterboard over, making sure to not tear the attached cable.

  • Pull the IR Sensor cable straight away from its socket on the board.

  • Be sure that you are not pulling on the cables as you remove the plug from its socket.

  • Blu-Ray drive remains.

  • If you are replacing the Blu-ray drive, you must use the same daughterboard that came with your PlayStation 3. The daughterboard is paired to the motherboard, and the Blu-ray drive will not work with a different board.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.