Ga door naar hoofdinhoud

PlayStation 3 Heat Sink Replacement

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 4 handleidingen die deze stap bevatten.

Stap 8 vertalen

Engels
Nederlands
Stap 8
PlayStation 3 Heat Sink Replacement: stap 0, afbeelding 1 van 1
  • Lift the motherboard assembly off the heat sink.

  • The heat sink may still be held in place by the thermal paste. If this is the case, gently pry the heat sink away from the motherboard housing. Make sure to not bend the copper piping on the heat sink.

  • Be sure to apply a new layer of thermal paste when reattaching the heat sink.

  • Never applied thermal paste before? Our thermal paste guide makes it easy.

  • If you're following the YLOD repair guide, stay tuned for where to apply the replacement thermal paste.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.