Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 3 handleidingen die deze stap bevatten.
Stap 1 vertalen
Stap 1
-
Remove the following screws securing the logic board to the rear case:
-
Two 2.4 mm standoff screws
-
One 2.1 mm Phillips #00 screw
| [* black] Remove the following screws securing the logic board to the rear case: | |
| [* red] Two 2.4 mm standoff screws | |
| - | [* icon_note] Use a small flathead screwdriver to remove these standoff screws. |
| + | [* icon_note] Standoff screws are best removed using a [product|IF145-388-4|standoff screwdriver|new_window=true] or bit. |
| + | [* icon_caution] In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components. |
| [* orange] One 2.1 mm Phillips #00 screw |
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.