Ga door naar hoofdinhoud

iPhone 6 Plusの正面カメラとセンサーアセンブリ

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 3 vertalen

Stap 3
iPhone 6 Plus Front Facing Camera and Sensor Assembly Replacement: stap 0, afbeelding 1 van 1
  • Remove the front-facing camera and sensor cable assembly off the display assembly.

  • Replacement assemblies may or may not come with the speaker mesh already attached. If it's missing, save your old one and re-use it. You can separate it with some heat from a hair dryer and gentle prying or pulling with tweezers.

正面カメラとセンサーケーブルアセンブリをディスプレイアセンブリから取り出します。

交換用のアセンブリにスピーカー用のメッシュがインストールされている場合があります。(インストールされていない場合もあります。)付いていない場合は、古いアセンブリから取り出して移植してください。ヘアドライヤーを使って温めて、ピンセットで慎重に剥がすかこじ開けて外します。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.