Ga door naar hoofdinhoud

iPhone 6 Plus 前面板组件更换

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 18 handleidingen die deze stap bevatten.

Stap 4
iPhone 6 Plus Front Panel Assembly Replacement: stap 0, afbeelding 1 van 3 iPhone 6 Plus Front Panel Assembly Replacement: stap 0, afbeelding 2 van 3 iPhone 6 Plus Front Panel Assembly Replacement: stap 0, afbeelding 3 van 3
  • Pull the home button end of the front panel assembly away from the rear case, using the top of the phone as a hinge.

  • Open the display to about a 90º angle, and lean it against something to keep it propped up while you're working on the phone.

  • Add a rubber band to keep the display securely in place while you work. This prevents undue strain on the display cables.

  • In a pinch, you can use an unopened canned beverage to hold the display.

拉起 home 键一端的前面板组件,以手机顶端为轴。

把显示屏打开到角度为 90º ,把它如图所示靠在某物上。

使用橡皮筋把显示屏固定在盒子上。这可以避免对显示屏电线不必要的拉扯。

如果手边找不到合适的物品,你也可以用没打开的易拉罐来固定。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.