/
DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Lid worden
Inloggen

用修补胶带修补绝缘夹克

Terug naar de handleiding
Engels
Chinees
Stap 4
Patch an Insulated Jacket with Repair Tape, Apply the patch: stap 0, afbeelding 1 van 3 Patch an Insulated Jacket with Repair Tape, Apply the patch: stap 0, afbeelding 2 van 3 Patch an Insulated Jacket with Repair Tape, Apply the patch: stap 0, afbeelding 3 van 3
Apply the patch

  • Check again that the cut patch is the right size for the hole.

  • Peel off the backing and carefully apply the patch over the hole, making sure to keep fingers clear of the sticky back of the patch.

  • Use tweezers to aid in peeling the backing off of smaller patches.

  • Use your fingers to smooth out any bubbles and apply pressure to the patch.

  • If the hole goes all the way through the jacket, repeat this process to place a piece of tape on the other side.

粘贴修补片

再次检查修补片是否完全覆盖破洞。

撕掉修补片背面的离型纸。对准破洞位置 ，小心粘贴。避免手指碰到胶面。

小尺寸修补片可用镊子辅助撕离型纸。

用手指从中心向四周推平，消除气泡. 施加均匀压力。

若破洞贯穿夹克内外层：在内层相同位置粘贴第二块修补片。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.