Dell Precision T3400 CPU Replacement

Engels

Nederlands

Stap 2 vertalen

Stap 2

Remove the Heat Sink

CAUTION: Even though the heat-sink assembly has a protective plastic covering, be careful when touching it -- the assembly may still be hot if your PC was just on.
Release the blue plastic secure lever under the heat-sink assembly by pushing the tab and pivoting the lever down and away from the assembly.
Remove the two screws located at the top and bottom of the heat-sink assembly using a standard Phillips-head screwdriver.
Pull the heat-sink assembly off the board as if it were a door with its hinges on the right.
Clean the old thermal paste from the contact points on the heat sink

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.