Repareer je spullen Gemeenschap Winkel

基础 LED 手电筒 DIY 焊接套件组装

Terug naar de handleiding
Engels
Chinees
Stap 19
Basic LED Flashlight DIY Soldering Kit Assembly, Check your work: stap 0, afbeelding 1 van 2 Basic LED Flashlight DIY Soldering Kit Assembly, Check your work: stap 0, afbeelding 2 van 2
Check your work

  • Double-check that the switch is flush with the board and that its solder joints are making a solid connection.

  • Check if any solder unintentionally bridged with a different joint. If so, carefully use your iron to heat the solder between the joints and separate the bridge. If the bridge doesn't want to separate, desolder it and try again.

检查你的工作

仔细检查开关是否与电路板齐平，以及其焊点是否连接牢固。

检查是否有任何焊料无意中与不同的接头桥接。如果是这样，请小心地使用烙铁加热接头之间的焊料并分离桥接。如果桥接不想分离，请 拆焊 它并重试。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.