Repareer je spullen Gemeenschap Winkel

基础 LED 手电筒 DIY 焊接套件组装

Terug naar de handleiding
Engels
Chinees
Stap 18
Basic LED Flashlight DIY Soldering Kit Assembly, Solder the switch: stap 0, afbeelding 1 van 3 Basic LED Flashlight DIY Soldering Kit Assembly, Solder the switch: stap 0, afbeelding 2 van 3 Basic LED Flashlight DIY Soldering Kit Assembly, Solder the switch: stap 0, afbeelding 3 van 3
Solder the switch

  • Make sure the switch stays flush with the board and the leads stay level with each other while you're soldering. If it becomes crooked, desolder the leads and try again.

  • Solder the three switch leads to the board.

焊接开关

焊接时，确保开关与电路板齐平，并且引线保持水平。如果发生弯曲，请拆焊 拆除引线并重试。

将三个开关引线焊接到电路板上。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.