Repareer je spullen Gemeenschap Winkel

기본 LED 손전등 DIY 납땜 키트 어셈블리

Terug naar de handleiding
Engels
Koreaans
Stap 17
Basic LED Flashlight DIY Soldering Kit Assembly, Flip the board over: stap 0, afbeelding 1 van 3 Basic LED Flashlight DIY Soldering Kit Assembly, Flip the board over: stap 0, afbeelding 2 van 3 Basic LED Flashlight DIY Soldering Kit Assembly, Flip the board over: stap 0, afbeelding 3 van 3
Flip the board over

  • Hold the switch flush against the front of the circuit board.

  • Flip the board over and set it down so the switch is resting on your work mat or surface.

  • Place the foam block underneath the board to keep it level while you solder.

보드 뒤집기

스위치를 회로 기판의 앞면과 같은 높이로 잡으세요.

보드를 뒤집어 스위치가 작업 매트나 표면 위에 놓으세요.

납땜하는 동안 수평을 유지하기 위해 폼 블록을 보드 아래에 배치하세요.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.