Repareer je spullen Gemeenschap Winkel

기본 LED 손전등 DIY 납땜 키트 어셈블리

Terug naar de handleiding
Engels
Koreaans
Stap 16
Basic LED Flashlight DIY Soldering Kit Assembly, Insert the switch: stap 0, afbeelding 1 van 3 Basic LED Flashlight DIY Soldering Kit Assembly, Insert the switch: stap 0, afbeelding 2 van 3 Basic LED Flashlight DIY Soldering Kit Assembly, Insert the switch: stap 0, afbeelding 3 van 3
Insert the switch

  • The switch is symmetrical and can be inserted in any orientation.

  • Place the switch on its outline on the front of the circuit board. Make sure all three leads go through their holes in the board.

스위치 끼우기

스위치는 대칭형이며 아무 방향으로나 끼울 수 있습니다.

스위치를 회로 기판 전면의 윤곽선 위에 놓으세요. 세 개의 리드가 모두 보드의 구멍을 통과하는지 확인하세요.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.