Repareer je spullen Gemeenschap Winkel

기본 LED 손전등 DIY 납땜 키트 어셈블리

Terug naar de handleiding
Engels
Koreaans
Stap 15
Basic LED Flashlight DIY Soldering Kit Assembly, Check your work: stap 0, afbeelding 1 van 2 Basic LED Flashlight DIY Soldering Kit Assembly, Check your work: stap 0, afbeelding 2 van 2
Check your work

  • Double-check that the battery connector is flush with the board and that its solder joints are making a solid connection.

  • If the solder joint doesn't surround the entire lead, reheat the joint and add more solder.

작업 확인하기

배터리 커넥터가 보드와 같은 높이인지, 납땜 조인트가 단단히 연결되어 있는지 다시 한 번 확인하세요.

납땜 조인트가 리드 전체를 감싸고 있지 않으면 조인트를 다시 가열하고 땜납을 더 추가하세요.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.