Repareer je spullen Gemeenschap Winkel

기본 LED 손전등 DIY 납땜 키트 어셈블리

Terug naar de handleiding
Engels
Koreaans
Stap 18
Basic LED Flashlight DIY Soldering Kit Assembly, Solder the switch: stap 0, afbeelding 1 van 3 Basic LED Flashlight DIY Soldering Kit Assembly, Solder the switch: stap 0, afbeelding 2 van 3 Basic LED Flashlight DIY Soldering Kit Assembly, Solder the switch: stap 0, afbeelding 3 van 3
Solder the switch

  • Make sure the switch stays flush with the board and the leads stay level with each other while you're soldering. If it becomes crooked, desolder the leads and try again.

  • Solder the three switch leads to the board.

스위치 납땜하기

납땜하는 동안 스위치가 기판과 같은 높이를 유지하고 리드가 서로 수평을 유지하는지 확인하세요. 납땜이 비뚤어지면 리드를 납땜 제거하고 다시 시도하세요.

스위치 리드 3개를 보드에 납땜하세요.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.