Ga door naar hoofdinhoud

iPad Mini CDMA Front Panel Replacement

Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 42 handleidingen die deze stap bevatten.

Engels
Nederlands
Stap 3
iPad Mini CDMA Front Panel Replacement: stap 0, afbeelding 1 van 3 iPad Mini CDMA Front Panel Replacement: stap 0, afbeelding 2 van 3 iPad Mini CDMA Front Panel Replacement: stap 0, afbeelding 3 van 3
  • Carefully place a suction cup halfway up the heated side.

  • Be sure the cup is completely flat on the screen to get a tight seal.

  • While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel glass from from the rear case.

  • Be careful to only lift the glass enough to insert an opening pick—any more and you may risk cracking the glass.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.