Ga door naar hoofdinhoud

Kobo Libra Colour 스크린 교체

Handleidingsinformatie

= Klaar = Onvolledig
Engels
Koreaans
      ***To reassemble your device, follow these instructions in reverse order.***
      Remember: after repairs, your eReader is no longer IPX8 waterproof.
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before you install it.
      Make sure your each of your device's main functions still work, e.g., LED backlight, touch, page-turn buttons, Wi-Fi, etc.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/Kobo_Libra_Colour|Answers Community|new_window=true] for help.

      Stappen

      Stap 1 — 마더보드 나사 풀기

      십자 스크루드라이버를 사용하여 마더보드를 고정하는 나사 7개를 풀어주세요:

      Stap 2 — 마더보드 분리하기

      손가락으로 잡을 수 있도록 스퍼저를 사용하여 마더보드를 충분히 들어 올리세요.

      Stap 3 — 마더보드 버퍼 접착제 부드럽게 하기

      플라스틱 마더보드 버퍼에 90초 동안 가열된 iOpener를 대어 프레임에 고정하는 접착제가 부드러워지도록 하세요.

      Stap 4 — 마더보드 버퍼 분리하기

      마더보드 버퍼의 한쪽 끝을 잡고 프레임에서 벗겨내어 접착제를 분리하세요.

      Stap 5 — 전면 커버 접착제 부드럽게 하기

      전면 커버는 클립과 접착제로 고정되어 있습니다.

      Stap 6 — 전면 커버 클립 풀기

      엄지 손가락으로 전면 커버의 아래쪽을 클립에서 밀어내고 다른 손가락으로 스크린을 반대 방향으로 당길 수 있도록 eReader를 잡으세요.

      Stap 7

      한 손으로 전면 커버의 모서리를 분리한 상태에서 다른 손으로 전면 커버의 왼쪽 가장자리를 프레임에서 떼어내세요.

      Stap 8

      모든 클립이 풀리고 접착제가 완전히 분리될 때까지 전면 커버 주위를 계속 작업하세요.

      Stap 9 — 전면 커버 분리하기

      프레임에서 전면 커버를 들어 올려 분리하세요.

      Stap 10 — 전도성 테이프 벗기기

      핀셋을 사용하여 스크린의 오른쪽 가장자리를 따라 손가락으로 잡을 수 있을 만큼 전도성 테이프를 벗겨내세요.

      Stap 11

      버튼 브래킷과 스크린에서 전도성 테이프를 벗겨내세요.

      Stap 12 — 버튼 보드 분리하기

      스크린에서 버튼 보드를 분리하세요.

      Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.