Ga door naar hoofdinhoud

iPad Pro 12.9インチ 第5世代 開口方法

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 6 handleidingen die deze stap bevatten.

Stap 2
iPad Pro 12.9" 5th Gen Opening Procedure, Anti-Clamp instructions: stap 0, afbeelding 1 van 3 iPad Pro 12.9" 5th Gen Opening Procedure, Anti-Clamp instructions: stap 0, afbeelding 2 van 3 iPad Pro 12.9" 5th Gen Opening Procedure, Anti-Clamp instructions: stap 0, afbeelding 3 van 3
Anti-Clamp instructions
  • The next three steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. If you aren't using the Anti-Clamp, skip down three steps for an alternate method.

  • For complete instructions on how to use the Anti-Clamp, check out this guide.

  • Pull the blue handle backwards to unlock the Anti-Clamp's arms.

  • Place an object under your iPad so it rests level between the suction cups.

  • Position the suction cups near the middle of the right edge—one on the top, and one on the bottom.

  • Hold the bottom of the Anti-Clamp steady and firmly press down on the top cup to apply suction.

  • If you find that the surface of your iPad is too slippery for the Anti-Clamp to hold onto, use tape to create a grippier surface.

ここからの3手順では、 リバースクランプを使う手順について説明しています。この工具は開口作業を簡単に行うために設計されたものです。リバースクランプを使わないで作業を行う場合は、ここから3手順を飛ばして、代わりの手順を参照して下さい。

リバースクランプのより詳しい使い方については、こちらのガイドをご覧下さい

青色のハンドルを吸盤の反対側に引っ張って、リバースクランプのアームのロックを解除して下さい。

iPadの下に支えになるようなものを置いて、吸盤の間に水平になるようにして下さい。

吸盤をiPadの左端の中央付近に移動させて下さい。片方が表側、もう片方が裏側に来るようにして下さい。

リバースクランプの下側が動かないように押さえてから、上からしっかり押し付けて上側の吸盤を張り付けて下さい。

iPadの表面が滑ってしまってリバースクランプの吸盤がうまく張り付かない場合は、粘着テープなどを使って上手く張り付くようにして下さい。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.