Ga door naar hoofdinhoud

iPad Pro 12.9" 5th Gen 여는 절차

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 6 handleidingen die deze stap bevatten.

Stap 21
iPad Pro 12.9" 5th Gen Opening Procedure, Unfasten the upper cable shield: stap 0, afbeelding 1 van 1
Unfasten the upper cable shield
  • Throughout this guide, keep track of each screw and reinstall it exactly where it came from.

  • Use a Phillips screwdriver to remove the two screws securing the upper cable shield:

  • One 1.8 mm-long screw

  • One 1.4 mm-long screw

  • During reassembly, this is a good point to power on your iPad and test all functions before sealing it up. Be sure to power your iPad back down before you continue working.

이 안내서 전체에서 각 나사를 추적하여 원래 있던 위치에 정확하게 다시 설치하세요.

필립스 스크루드라이버를 사용하여 상단 케이블 실드를 고정하는 나사 두 개를 풀어주세요:

1.8mm 길이 나사 1개

1.4mm 길이 나사 1개

재조립할 때 iPad의 전원을 켜고 모든 기능을 테스트한 후 기기를 닫는 것이 좋습니다. 작업을 계속하기 전에 iPad의 전원을 다시 꺼야 합니다.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.