Ga door naar hoofdinhoud

Nintendo Switch OLED Model 마더보드 교체

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 5
Nintendo Switch OLED Model Motherboard Replacement, Unfasten the right Joy-Con sensor rail: stap 0, afbeelding 1 van 2 Nintendo Switch OLED Model Motherboard Replacement, Unfasten the right Joy-Con sensor rail: stap 0, afbeelding 2 van 2
Unfasten the right Joy-Con sensor rail
  • Use a Phillips driver to remove the two 3.8 mm screws securing the left Joy-Con sensor rail to the frame.

Vertaling hier toevoegen

+[title] Unfasten the right Joy-Con sensor rail
+[* red] Use a Phillips driver to remove the two 3.8 mm screws securing the left Joy-Con sensor rail to the frame.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.