Mijn werkbank

Krijg snel toegang tot handleidingen, onderdelen en antwoorden voor jouw apparaten

Samsung Galaxy S20 FE (SM-G780F) Display Assembly Replacement

Terug naar de handleiding

Engels

Nederlands

Vorige stap Volgende stap

Stap 6 vertalen

Stap 6

Samsung Galaxy S20 FE (SM-G780F) Display Assembly Replacement, Remove Sub-Board Connectors: stap 0, afbeelding 1 van 3

Samsung Galaxy S20 FE (SM-G780F) Display Assembly Replacement, Remove Sub-Board Connectors: stap 0, afbeelding 2 van 3

Samsung Galaxy S20 FE (SM-G780F) Display Assembly Replacement, Remove Sub-Board Connectors: stap 0, afbeelding 3 van 3

Remove Sub-Board Connectors

Use a spudger to remover the connectors for the display, fingerprint sensor and main-sub board. Pry the fingerprint sensor from the side to release and remove it.
Remove the retaining screw for the sub-board.
Use a spudger to pry the sub-board loose. Once loose, pry the cables up to release them from the channel going up the side of the frame.
Once the board and cables are loosened, the mainboard, sub-board and cables can all be removed together. If you aren't comfortable trying to remove everything with the cables still attached, disconnect the cables from the sub-board and mainboard first.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.