Delonghi Icona ECO Disassembly

Stap 1 — Setup and removal of the external parts

Before proceeding to the disassembly remove the coffee filter(marked in green) and the steam knob( marked in light blue): pulling up with a (lot) of force and confidence.

Stap 2 — Removing the bottom part

[back view] Once you remove the clear water tank, you can unscrew the two bottom screws (marked in green) and the two upper screws(marked in red) that will allow us to remove the metallic upper lid later on.

Stap 3 — Disassembly of the upper lid

Once you removed the bottom part, you can start to remove the lid. From the bottom unscrew 3 screw (marked in green)

Stap 4 — Free the internals

Partially remove the lid and remove the yellow/green cable (ground) from the lid (marked in green) pulling it away

Stap 5 — Remove the heating element

Remove the Philips screws(marked in red - Philips) that hold the heating element on the structure

Stap 6 — Heating element opened

Once you removed the heating element you can replace the necessary pieces : bottom piece(red arrow), O-ring (orange arrow), upper piece (yellow arrow)