Corded Dexter Jigsaw 750 Watts Blade Holder Replacement

Stap 1 — Unplug

Before starting, remember to unplug the device.

Stap 2

Remove the vacuum hose adapter at the back of the device.

Stap 3

With the help of a screwdriver, unscrew and open the device.

Stap 4

Using pliers, remove the clip beside the blade holder.

Stap 5

Take off the blade holder, then raise the slide located at the end of the holder.

Stap 6

First, put the slide onto the new blade bracket.

Stap 7

Put the blade bracket back in its place.

Stap 8

Replace the clip in the same place. The curved side of the clip needs to go into the round side of the bracket.

Stap 9

Close and screw the device back together.