Ga door naar hoofdinhoud

任天堂Switch Lite拆解

Stap 4
Nintendo Switch Lite Teardown: stap 0, afbeelding 1 van 3 Nintendo Switch Lite Teardown: stap 0, afbeelding 2 van 3 Nintendo Switch Lite Teardown: stap 0, afbeelding 3 van 3
  • The way is blocked by impassable (tri-point) screws. We can't progress further until we find and acquire the special tool.

  • No distracting side quests today—we're on a mission and we brought all the tools needed to beat the game. Y00 driver, we choose you!

  • Under the back cover, we find: another cover. Moving on.

  • We note here that the SD card reader is now permanently attached to the main board—whereas on the old Switch, we had already removed it by this point.

  • Modularity is generally good for repair, so this is minor step backwards from our point of view.

  • Let's peek under the metal shield and get our first look at the internals in the visible light spectrum.

不可逾越的三点式螺丝挡住了我们前进的道路。我们在找到合适的工具后才得以是前进的道路不断延伸。

今天什么困难都不能阻挡我们-我们要执行这个任务,所以带来了所需的所有工具。Y00螺丝刀,就决定是你了!

在后盖下方我们找到了另一个后盖。继续。

我们注意到SD卡读卡器现在被永远固定在了主逻辑板上-但是在老的switch上,我们在这个步骤已经可以将其移除了。

模块化大体上有利于维修,所以我们认为这个小点是历史性地倒退。

让我们瞧瞧这些金属屏蔽罩下方,switch的内部结构第一次出现在了可见到光波段。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.