Ga door naar hoofdinhoud

Google Pixel 3a XL スクリーンの交換

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 4 handleidingen die deze stap bevatten.

Stap 11
Google Pixel 3a XL Screen Replacement: stap 0, afbeelding 1 van 3 Google Pixel 3a XL Screen Replacement: stap 0, afbeelding 2 van 3 Google Pixel 3a XL Screen Replacement: stap 0, afbeelding 3 van 3
  • Slide your opening pick along the bottom edge of the phone to separate the last of the adhesive holding the screen in place.

  • As shown in step one, the gap between the display and the edge of the screen is larger here than on the sides.

  • If you plan to reuse your screen, take special care in this step to either keep your pick deep in the phone under the OLED display (as shown in this step's photos), or only insert it 5 mm into the device to avoid coming into contact with the display under the glass.

  • Don't try to remove the screen yet! It is still connected to the phone by a display cable.

開口ピックをデバイス下側端に沿ってスライドし、スクリーンを固定している最後の接着剤を切開します。

手順1で示したように、ここでは、ディスプレイとスクリーン端の間の隙間が、側面よりも大きくなります。

スクリーンを再利用する場合は、この手順の内容に特別な注意を払って、OLEDディスプレイ下の奥深くにピックを残しておくか(この手順の画像を参照ください)、ガラス下のディスプレイに接触しないよう、デバイス内側に5 mmだけ開口ピックを差し込みます

まだスクリーンを取り出さないでください! ディスプレイケーブルでデバイスに接続されたままです。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.