Ga door naar hoofdinhoud

iFixit gebruikt cookies om de functionaliteit van de site te verbeteren, het verkeer te analyseren en advertenties te personaliseren. Door onze site te gebruiken, gaat u akkoord met ons cookiegebruik en privacybeleid.

Remplacement de l'ensemble LCD de l'iPad mini CDMA

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 42 handleidingen die deze stap bevatten.

Stap 1 vertalen

Stap 1
iPad Mini CDMA LCD Assembly Replacement: stap 0, afbeelding 1 van 3 iPad Mini CDMA LCD Assembly Replacement: stap 0, afbeelding 2 van 3 iPad Mini CDMA LCD Assembly Replacement: stap 0, afbeelding 3 van 3
  • Small pieces of foam tape cover the top and bottom right-hand screws securing the LCD to the rear case.

  • Use tweezers to peel up and remove the rectangular piece of foam tape covering the top right LCD screw.

  • Remove the triangular tape covering the lower right LCD screw.

De petits morceaux de mousse autocollante recouvrent les vis droites supérieures et inférieures, fixant l'écran LCD à la coque arrière.

Utilisez une pincette pour décoller et enlever le morceau rectangulaire de mousse recouvrant la vis supérieure droite du LCD.

Retirez le morceau triangulaire de mousse recouvrant la vis inférieure droite du LCD.

[* icon_note] Small pieces of foam tape cover the top and bottom right-hand screws securing the LCD to the rear case.
-[* black] Use tweezers to peel up and remove the rectangular piece of foam tape covering the top right LCD screw.
+[* black] Use [product|IF145-020|tweezers] to peel up and remove the rectangular piece of foam tape covering the top right LCD screw.
[* black] Remove the triangular tape covering the lower right LCD screw.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.