Ga door naar hoofdinhoud

Reemplazo de panel frontal iPad Mini CDMA

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 42 handleidingen die deze stap bevatten.

Stap 9
iPad Mini CDMA Front Panel Replacement: stap 0, afbeelding 1 van 1
  • Reheat the iOpener and place it on the top edge of the iPad, over the front-facing camera.

  • Be careful not to overheat the iOpener during the repair procedure. Wait at least ten minutes before reheating the iOpener.

  • If you have a flexible iOpener, you can bend it to heat both the upper left corner and the upper edge at the same time.

Vuelve a calentar el iOpener y colócalo en el borde superior del iPad, sobre la cámara frontal.

Ten cuidado de no sobrecalentar el iOpener durante el procedimiento de reparación. Espera al menos diez minutos antes de volver a calentar el iOpener. .

Si tienes un iOpener flexible, puedes doblarlo para calentar tanto la esquina superior izquierda como el borde superior al mismo tiempo

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.