/
Mijn werkbank

Krijg snel toegang tot handleidingen, onderdelen en antwoorden voor jouw apparaten

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Lid worden
Inloggen

Desmontaje del iPad 11"

Terug naar de handleiding
Engels
Spaans
Stap 19
iPad Pro 11" Teardown: stap 0, afbeelding 1 van 3 iPad Pro 11" Teardown: stap 0, afbeelding 2 van 3 iPad Pro 11" Teardown: stap 0, afbeelding 3 van 3

  • A large black ribbon cable unfurls from around the Pencil body, revealing what looks like a capacitative grid!

  • This is likely used to register tap inputs, but this grid ought to help the Pencil know where—not just when—you tap. Could more complex gestures be on the way?

  • Unfortunately, it's back to destruction from here—the Pencil's many welded steel layers put up quite a fight, and we're only able to reveal a few components.

  • Battery (even we don't want to tempt that little explosive)

  • Wireless charging coil

  • Alignment magnets

  • Broadcom BCM59358A0 wireless charging IC (likely)

  • Analog Devices 343S00250 Apple Pencil nib sensor controller (likely)

Un gran cable plano negro se despliega desde alrededor del cuerpo del Lápiz revelando lo que parece una grilla capacitativa.

Es probable que esto se utilice para registrar los ingresos de pulsaciones pero esta grilla debería ayudar a que el Lápiz sepa dónde, no solo cuándo, pulsas. ¿Será que nuevos gestos más complicados están por llegar?

Desafortunadamente, volvemos a la destrucción aquí. Las capas soldadas de acero nos dan bastante pelea y solo podemos revelar unos pocos componentes.

Batería (ni siquiera nosotros queremos tentar a ese pequeño explosivo)

Bobina de carga inalámbrica

Magnetos de alineación

Controlador táctil Broadcom 59358A0

Circuito integrado personalizado de Apple 343S00250

[* black] A large black ribbon cable unfurls from around the Pencil body, revealing what looks like a capacitative grid!
[* icon_note] This is likely used to register tap inputs, but this grid ought to help the Pencil know where—not just when—you tap. Could more complex gestures be on the way?
[* black] Unfortunately, it's back to destruction from here—the Pencil's many welded steel layers put up quite a fight, and we're only able to reveal a few components.
[* red] Battery (even we don't want to tempt that little explosive)
[* orange] Wireless charging coil
[* yellow] Alignment magnets
- [* green] Broadcom 59358A0 touch controller
- [* light_blue] Custom Apple 343S00250 IC
+ [* green] Broadcom BCM59358A0 wireless charging IC (likely)
+ [* light_blue] Analog Devices 343S00250 Apple Pencil nib sensor controller (likely)

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.