Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.
Stap 1 vertalen
Stap 1
-
Pull Touchscreen out and rotate 90 degrees. Remove the four 3 mm Phillips #000 head screws that are now exposed at the hinge.
-
Remove the two 5 mm Phillips #000 head screws that near the viewfinder.
-
Use a spudger and pry apart the two plastic columns surrounding the screen hinge.
-
Rotate the screen forward 90 degrees and push it back into its housing against the camera.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.