Stap 3 vertalen
Stap 3
-
Remove the battery.
-
If you used isopropyl alcohol, wait ten minutes before installing the new battery to allow the alcohol to completely evaporate.
| [* black] Remove the battery. | |
| - | [* icon_caution] Do not reuse the battery after it has been removed, as doing so is a potential safety hazard. Replace it with a new battery. |
| - | [* icon_reminder] To install a new battery: |
| - | [* black] Remove any remaining adhesive from the phone, and clean the glued areas with isopropyl alcohol and a lint-free cloth. |
| - | [* black] Secure the new battery with [guide|113604|pre-cut adhesive|new_window=true] or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the phone, not directly onto the battery. The adhesive should go around the perimeter of the battery compartment, but not in the rectangular cutout in the center (which is actually the back side of the display). |
| - | [* black] Press the battery firmly into place for 5-10 seconds. |
| + | [* icon_caution] Do not reuse the battery after it has been removed, as doing so is a potential safety hazard. Replace it with a new battery. |
| + | [* black] If you used isopropyl alcohol, wait ten minutes before installing the new battery to allow the alcohol to completely evaporate. |
| + | [* icon_reminder] To install a new battery and adhesive, [guide|123541|follow this guide|new_window=true]. |
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.