Ga door naar hoofdinhoud

Inleiding

Prereq only, battery removed.

Onderdelen

Geen onderdelen opgegeven.

  1. Remove the single 2.8 mm Phillips #00 screw securing the plastic clip to the logic board.
    • Remove the single 2.8 mm Phillips #00 screw securing the plastic clip to the logic board.

  2. Remove the single 1.3 mm Phillips #00 screw recessed against the top of the rear case.
    • Remove the single 1.3 mm Phillips #00 screw recessed against the top of the rear case.

  3. Use a pair of tweezers to firmly grasp the plastic clip and remove it from the iPhone.
    • Use a pair of tweezers to firmly grasp the plastic clip and remove it from the iPhone.

  4. Remove the single 1.6 mm Phillips #00 screw securing the antenna clip to the rear case.
    • Remove the single 1.6 mm Phillips #00 screw securing the antenna clip to the rear case.

  5. Carefully grasp the antenna clip with a pair of tweezers and remove it from the iPhone.
    • Carefully grasp the antenna clip with a pair of tweezers and remove it from the iPhone.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 228