Lenovo Tab 2 A7-20F Front Glass Replacement

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 1 vertalen

Terug naar de handleiding

Engels

Nederlands

Stap 1

Lenovo Tab 2 A7-20F Front Glass Replacement: stap 0, afbeelding 1 van 3

Lenovo Tab 2 A7-20F Front Glass Replacement: stap 0, afbeelding 2 van 3

Lenovo Tab 2 A7-20F Front Glass Replacement: stap 0, afbeelding 3 van 3

Use the heat gun to loosen the adhesive around the perimeter of the screen(the solid black section).
The spudger tools can then be slowly worked under the screen to gradually lift it away from the case.
Due to the close proximity of the digitizer to the adhesive, if that component is not being replaced take care not to scratch the screen with the spudger.
Under the top section where the Lenovo logo is lies a copper strip that has adhesive on both sides. It is easiest to get under that strip when you start from the bottom and work up.
Next step will show the copper strip.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.