Ga door naar hoofdinhoud

Canon PowerShot A1000 IS Case Disassembly

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 8 vertalen

Engels
Nederlands
Stap 8
Canon PowerShot A1000 IS Case Disassembly: stap 0, afbeelding 1 van 2 Canon PowerShot A1000 IS Case Disassembly: stap 0, afbeelding 2 van 2
  • When replacing the cover, remove the AV/USB rubber cover for easier reconstruction.

  • Replace the front cover first leaving a small gap on the left hand side of the device for easy reattachment of the back cover.

  • Reattach the back cover by aligning it with the front cover and snapping the latches into place. Secure with screws in any order.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.