Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 5 handleidingen die deze stap bevatten.
Stap 3 vertalen
Stap 3
-
There are five flex connectors located on the motherboard. They look like rectangular metal boxes with a thin strip connected to them.
-
Unclip the connectors from the motherboard using the plastic opening tool. Lightly press the wedge end of the tool to the opposite site of the connector with the strip attached to it, and pry it up.
-
Place the plastic opening tool underneath the motherboard near where the three prongs stick out of the bottom and push the motherboard up to remove it.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.