Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 3 handleidingen die deze stap bevatten.
Stap 4 vertalen
Stap 4
-
Using a Phillips #00 screwdriver, remove the following screws:
-
Four 5mm wide grey Phillips screws on the logic board.
-
Seven 3mm small grey Phillips screws (four on one side, three on the other) from the black side casing.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.