Ga door naar hoofdinhoud

Canon PowerShot SD1200 IS Front and Rear Covers Replacement

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 6 handleidingen die deze stap bevatten.

Engels
Nederlands
Stap 2
Canon PowerShot SD1200 IS Front and Rear Covers Replacement: stap 0, afbeelding 1 van 3 Canon PowerShot SD1200 IS Front and Rear Covers Replacement: stap 0, afbeelding 2 van 3 Canon PowerShot SD1200 IS Front and Rear Covers Replacement: stap 0, afbeelding 3 van 3
  • Remove the two screws from the side of the camera casing with the strap. (4mm Phillips 00)

  • Remove the two screws from the bottom of the camera. (4mm Phillips 00)

  • Remove the two screws from the right side of the camera opposite the strap. (2mm Phillips 00)

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.