How to Repair Wires on Axess SPBT1031

Stap 10 vertalen

Terug naar de handleiding

Engels

Nederlands

Stap 10

How to Repair Wires on Axess SPBT1031: stap 0, afbeelding 1 van 1

Assuming you have enough wire length to spare, insert the bare wire into a wire butt connector so it just passes the nub on one end.
Then use a wire crimping tool to crimp the the butt connector, therefore making a solid contact connection.
Repeat for the loose wire into the other end of the same wire butt connector.
If you do not have enough wire length to spare, then secure some small gauge wire replacement to bridge the gap. If this is the case you will need at least two wire butt connectors, follow the same steps as above to crimp the wire.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.