ChiliTechnology ChiliCube Teardown

Vorige stap Volgende stap

Stap 6 vertalen

Terug naar de handleiding

Engels

Nederlands

Stap 6

ChiliTechnology ChiliCube Teardown, Remove top of case: stap 0, afbeelding 1 van 2

ChiliTechnology ChiliCube Teardown, Remove top of case: stap 0, afbeelding 2 van 2

Remove top of case

Unhook connector for small ribbon cable which connects control board on top of cube with circuit board on bottom of cube.
Flip cube over (carefully supporting the inside mechanism--its not attached to the case anymore) and then lift case off. Don't go yanking it away brusquely, that control cable may have gotten pinned underneath even though you disconnected it.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.