How to reduce ChiliCube noise level by replacing fans

Vorige stap Volgende stap

Stap 5 vertalen

Terug naar de handleiding

Engels

Nederlands

Stap 5

How to reduce ChiliCube noise level by replacing fans, Remove connection to top of case: stap 0, afbeelding 1 van 2

How to reduce ChiliCube noise level by replacing fans, Remove connection to top of case: stap 0, afbeelding 2 van 2

Remove connection to top of case

There is a small circuit board attached to the top part of the case for buttons and display readout. It is connected to the main circuit board on the unit by a small cable.
Unhook connector this small ribbon cable from the main circuit bord on the bottom of the unit (which is now facing you.)
The connector should pull out without needing to be released in any way.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.