Ga door naar hoofdinhoud

Fitbit charge HR Disassembly

Stap 1 vertalen

Engels
Nederlands
Stap 1
Fitbit charge HR Disassembly, Removing the guts: stap 0, afbeelding 1 van 1
Removing the guts
  • Remove all four T3 Torx screws. Then "pop" out the electronics by pressing in the reset hole and pushing out the side with a pin. Use your thumb and push it up towards the wrist band clip (top in this picture). The unit "slides" up and out.

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.