Canon PowerShot D20 LCD Screen Replacement

Vorige stap Volgende stap

Stap 3 vertalen

Terug naar de handleiding

Engels

Nederlands

Stap 3

Canon PowerShot D20 LCD Screen Replacement: stap 0, afbeelding 1 van 2

Canon PowerShot D20 LCD Screen Replacement: stap 0, afbeelding 2 van 2

Using the 1.5mm hex screwdriver, remove the four screws from the rear of the case.
Remove the screw from the bottom of the case.
The bottom screw and the top-right screw are both .15". The two bottom-right screws are both .4".
The top-middle screw is also .15" but has a different size thread and a blue mark.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.