Andis Master Clippers Motor/Coil Assembly Replacement

Stap 1 vertalen

Terug naar de handleiding

Engels

Nederlands

Stap 1

Andis Master Clippers Motor/Coil Assembly Replacement: stap 0, afbeelding 1 van 3

Andis Master Clippers Motor/Coil Assembly Replacement: stap 0, afbeelding 2 van 3

Andis Master Clippers Motor/Coil Assembly Replacement: stap 0, afbeelding 3 van 3

Caution: Make sure the clippers are unplugged from any electrical outlets before beginning teardown.
Using the Philips screwdriver, unscrew the two housing cover screws indicated.
using the Philips screwdriver, unscrew the two mounting screws indicated, holding down the Coil Assembly.
Reminder: keep track of appropriate washers with each screw
Using the Philips screwdriver, remove the switch installment screw indicated.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.