Samsung NX300 Rear Menu Button Replacement

Vorige stap Volgende stap

Stap 2 vertalen

Terug naar de handleiding

Engels

Nederlands

Stap 2

Samsung NX300 Rear Menu Button Replacement, Remove the Metallic Panel: stap 0, afbeelding 1 van 2

Samsung NX300 Rear Menu Button Replacement, Remove the Metallic Panel: stap 0, afbeelding 2 van 2

Remove the Metallic Panel

Using a Phillips #00 precision screwdriver, remove the five 3mm screws.
Using a plastic opening tool, slowly lift up the entire metal piece from the back of the camera.
If the panel has never been removed from the camera before, it will be glued firmly to the back panel and will require some force to remove. To prevent breaking the back panel, work the plastic opening tool under different areas of the metal plate until it is completely released.
There are two small magnetic blocks housed underneath the metallic plate. These are for securing the swivel screen in place while it is closed.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.