Ga door naar hoofdinhoud

Nintendo Wii Motherboard Cover Replacement

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 6 handleidingen die deze stap bevatten.

Engels
Nederlands
Stap 10
Nintendo Wii Motherboard Cover Replacement: stap 0, afbeelding 1 van 3 Nintendo Wii Motherboard Cover Replacement: stap 0, afbeelding 2 van 3 Nintendo Wii Motherboard Cover Replacement: stap 0, afbeelding 3 van 3
  • Remove the three 10 mm Phillips screws securing the black bracket to the bottom panel near the front of the Wii.

  • Slightly lift the bracket and use your other hand to pull the retaining clip away from where the Wi-Fi antennas enter the motherboard sheild.

  • Remove the bracket from the Wii.

  • Be sure not to lose the small square nut loosely held by the black plastic bracket.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.