Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 2 handleidingen die deze stap bevatten.
Stap 4 vertalen
Stap 4
-
Gently lift the SD & SIM card board (PCB) as shown in the following pictures.
-
This will expose the ribbon cable attached to the board and another ribbon cable for the mother board. Remove them both using the spudger.
-
Once the small one is removed the small board can be pulled off.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.