Ga door naar hoofdinhoud
Help
Bewerken van stap 3 —

Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 18 handleidingen die deze stap bevatten.

Stap type:

Sleep om te herschikken

Use the clear plastic pull tab to gently lift the battery out of the iPhone.

If the tab breaks before the battery is freed, carefully slide a spudger under the battery tab to release the adhesive. Prying in other places may cause damage.

If your replacement battery came in a plastic sleeve, remove it before installation by pulling it away from the the ribbon cable.

Before reconnecting the battery connector, be sure the contact clip (shown in red) is properly positioned next to the battery connector.

Before reassembly, clean metal-to-metal contact points with a de-greaser such as windex. The oils from your fingers have the potential to cause wireless interference issues.

Perform a hard reset after reassembly. This can prevent several issues and simplify troubleshooting.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.