Mijn werkbank

Krijg snel toegang tot handleidingen, onderdelen en antwoorden voor jouw apparaten

Dell Precision T3400 CPU Replacement

Terug naar de handleiding

Engels

Nederlands

Stap 6 vertalen

Stap 6

Dell Precision T3400 CPU Replacement, Reinstall the Heat-Sink Assembly: stap 0, afbeelding 1 van 1

Reinstall the Heat-Sink Assembly

Place the heat-sink assembly back on its hinges.
Pivot the heat-sink assembly back to its original position and secure it with the two screws removed earlier.
Replace the floppy drive's ribbon cable (if you have one).
NOTE: Be sure the heat-sink assembly is seated properly and secured tightly. If it is loose or uneven, it cannot absorb heat properly and could cause your PC to unexpectedly shut down to prevent overheating.
Clean the heat sink before reassembly

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.