Ga door naar hoofdinhoud

Canon EOS Rebel T3 Shutter Assembly Replacement

Engels
Nederlands
Stap 3
Canon EOS Rebel T3 Shutter Assembly Replacement: stap 0, afbeelding 1 van 1
  • On the back of the camera, remove the following screws holding the metal bracket in place:

  • Four M1.7x5.5mm Phillips #000 screws

  • Three M1.7x5.0mm Phillips #000 screws

  • One M2.0x4.3mm JIS #000 screw

  • Pull off the metal bracket, being careful not to damage any of the ribbon cables.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.