Dell 1350cnw Printing LED Board Replacement

Stap 2 vertalen

Terug naar de handleiding

Engels

Nederlands

Stap 2

Dell 1350cnw Printing LED Board Replacement, Remove LED board: stap 0, afbeelding 1 van 3

Dell 1350cnw Printing LED Board Replacement, Remove LED board: stap 0, afbeelding 2 van 3

Dell 1350cnw Printing LED Board Replacement, Remove LED board: stap 0, afbeelding 3 van 3

Remove LED board

Unscrew the 7mm phillips screw holding the bracket at either end of the PCB.
Unclip the brackets and lift away the LED board.
Removing or replacing this part will slightly misalign the printing output for that colour, which can be fixed by carrying out the alignment/ calibration process in the printer settings.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.