Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 2 handleidingen die deze stap bevatten.
Stap 4 vertalen
Stap 4
Remove the USB enclosure
-
Use your fingers to slide the USB board enclosure out from under the metal clip securing it to the shell.
-
Remove the enclosure.
-
Make sure the Pair button is properly oriented and fully inserted in its slot.
-
Firmly slide the enclosure into position until it snaps into place under the metal clip.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.