Disassembling reMarkable 2 for a stuck power button

Vorige stap Volgende stap

Stap 2 vertalen

Terug naar de handleiding

Engels

Nederlands

Stap 2

Disassembling reMarkable 2 for a stuck power button, Remove screws and get access to internals: stap 0, afbeelding 1 van 3

Disassembling reMarkable 2 for a stuck power button, Remove screws and get access to internals: stap 0, afbeelding 2 van 3

Disassembling reMarkable 2 for a stuck power button, Remove screws and get access to internals: stap 0, afbeelding 3 van 3

Remove screws and get access to internals

Very carefully slice through the adhesive in the pink box and undo the connector using the plastic prying tool, this is the connector to the battery.
You will be cutting close to ribon cables so be very careful. (check step 4 for their location)
Start by removing the two silver screws in the orange boxes.
Pull the metal edge completly off. Be carefull as the power button is not held in place and will come come off along with the metal edge.
If you want to get power button unstuck, you don't need to remove the metal cover, but only the edge cover. For reparations not regarding the power button, remove also the metal cover. Follow the screw scheme in the first image to keep them separated by colour.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.