Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.
Stap 1 vertalen
Stap 1
-
Remove six 4 mm screws using a JIS #0 screwdriver.
-
Insert the flat end of a spudger in the gap between the motherboard and the rest of the mouse.
-
Slowly pry up the edge of the board, moving around the mouse slowly in a counterclockwise direction.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.